Skip to main content

Tips on Deck Replacement and Raised Patio




Deck replacement and raised patio is about making your landscape looking good in general.  Ideally, you have to replace damaged decks and raise your patio from time to time to make your front a sight to behold and expensive repairs later on.  Here are some tips provided by landscape contractors to make your deck and patio look perpetually new.

Dings, scratches and stains are the most common things you’ll need to repair on your deck, and ease of repair varies widely depending on the materials you use. For certain types of decking materials, pressure-treated wood, cedar or redwood are recommended: These types of wood are remarkably easy to work with when you get a scratch or gouge on the surface. All you need to do is sand the boards until the stain, scratch or gouges disappears and then re-stain, paint or seal the deck to give it a finished look again.

Tropical hardwoods are so dense that they rarely have significant scratching issues. However, the wood reacts with any metals that aren’t stainless steel, so if your patio furniture doesn’t have a protective cushion on the foot or if other types of metal rest against the deck surface, the wood can develop unsightly black oxidation stains.

Many of the older composite materials have a brushed surface which makes sanding out any scratches easier.  But these materials do not resist stains as well as newer capped composite materials.  So if you have a stain that won’t come off with either soap and water or a specialized solution such as Corte*Clean Composite Cleaner, your last option is to flip over the board to the other side, or replace the board.

Many of the newer capped composite decking materials are exceptionally resistant to scratches and stains, so this isn’t an issue you should have to deal with often.  But dropping a heavy item such as the claw head of a hammer can create a gouge, and dropping anything that’s very hot can also mar the surface by melting it. TimberTech, a composite manufacturer, recommends the use of a clothing iron on small scratches, to re-melt the plastic and smooth the surface.  If more serious intervention is needed, board replacement is next, because most capped composite boards are one-sided.

Regular maintenance of your deck is really important not only for aesthetic reasons, but also to keep it structurally sound and free of slippery mold or algae. Most types of wood decking require cleaning and either staining or oiling every one to two years, while composite decking requires little care beyond cleaning to continue looking sharp. The cleaning and care process is different for each material.

Pressure-treated wood, cedar and redwood are types of wood decks that require the most maintenance. The best way is by cleaning, lightly sanding, and staining or sealing every one to two years. It’s also important not to let leaves or other debris pile up on your deck, since that can make deck boards slippery and encourage rot. While pipe and other tropical hardwoods are dense and strong, they still need regular maintenance just like other types of wood.  You can try pressure washing, and then oiling the wood yearly to keep the color of your deck bright.

Comments

Popular posts from this blog

Grading and Drainage Crucial in Water Gardens

In terms of design and care of water gardens, grading and drainage are key considerations.   You just can’t install a water garden in your landscaped yard without a proper grading and drainage system. This is because inefficient or inadequate draining can result in all kinds of hazards that can cost you in the long run.  If outdoor spaces are not designed with drainage in mind, un-drained water can cause a variety of problems in your yard. For example, standing water can compromise the structural integrity of the foundation of your home and any other outdoor structures. It can also jeopardize the health of your plants if their roots become water-logged. This is a particular concern for water-sensitive plants. Poor drainage management can potentially cause other serious dangers such as mosquito infestation and inconveniences such as soggy lawns and unsightly, muddy swamps. It is therefore important that you take these potential challenges seriously.  A good idea is

Every Home Needs Landscaping Repair and Restoration

  Before   After After three or four years, your once beautiful landscape project will inevitably turn into an eyesore and a liability. There’s no escaping this problem.  Perhaps the pavers on the walkway become uneven or the gaps between the pavers grow wider and unsightly.  Worse, your entire patio may now be leaning towards your home causing rainwater to slowly erode its foundation. This happens to every home with a landscape attraction out front even if the landscape work was done by a good contractor.  Blame it on the elements and the wear and tear brought by time as a matter of course.  So it behooves upon the homeowner to look for landscaping repair and restoration .  In case the landscape contractors you originally got made a shoddy job, the imperative is for you to find a team that can repair the mistakes done on your yard. The team you need is one that can move in quickly to properly level pavers, support retaining walls, rebuild features, and eve

Permeable Walkway on a Deck Landing

There is no limit to the design of deck landings homeowners can build to beautify their front yard.  It all depends on your imagination, your local building codes and the purpose for which you intend to use the residential deck landing.  A great option is a deck landing with a permeable walkway .  If your deck is low to the ground, you have many design options for its stairs. Because low decks require only one or two steps, building codes may not require railings or landings. You may decide to set the stairs at an angle at a corner of the deck using wide steps to give the deck a contemporary look. To heighten this effect, incorporate several angles for the same set of stairs or add an additional set of stairs off another corner of the deck. If the deck is high above the ground, railings and landings will be required according to building codes. One design idea is to use a landing to mark a change in the direction of the bottom portion of the stairs.